5-Pin to 5-Pin Joystick Cable (24cm)

5-Pin to 5-Pin Joystick Cable (24cm)

Connect your joystick to your fighting board without soldering. Both ends use the same 5-pin connector, so one end plugs into the lever and the other plugs into the board’s joystick socket.

Features

• 5-pin connector on both ends for levers and fighting boards with a standard 5-pin joystick socket.
• 24cm length gives enough slack to route the cable neatly inside most stick cases.
• Colour-coded wires make each direction easy to identify.
• A good replacement for a short or damaged lever cable.

Specifications

• Lever end: 5-pin female connector
• Board end: 5-pin female connector
• Wires: 5 (GND, Up, Down, Left, Right)
• Length: 24cm

In the box

• 1 × 5-pin to 5-pin joystick cable

Check that both your joystick and your board have a 5-pin socket before you buy. If your board has single direction pins instead (such as RP2040 / PICO boards), choose our 5-Pin Joystick Cable — 5-Pin to Single Pins. Message us on WhatsApp if you are not sure.